Advanced Technologies Ultimate Primer 1L & 2.5L

ATSBUP (SOLVENT-BASED)

The ultimate shellac-based primer and stain blocker. Offering excellent adhesion to glossy surfaces - even glass. Blocks stubborn and persistent stains. The advanced shellac formula seals porous surfaces with excellent enamel holdout, even sealing bleeding knots and sap streaks. Suitable for use on water stains, fungal degradation, nicotine, oil stains, marker pen stains and more. Designed to permanently block odours (from smoke and fire damage to odours from pets and nicotine). The dried film is non-toxic and hypo-allergenic and may be used in areas where incidental contact with food items occur. Ideal for interior ceilings, walls, doors and general paintable surfaces. Including spot priming on wood, metal, trims and PVC.

Advanced Technologies Stain Cover + 1L & 2.5L

ATSCW (SOLVENT-BASED)

An interior / exterior primer/sealer, stain sealer and bonding coat that dries for over-coating in only two hours. Stains of all kinds are permanently sealed so topcoats are blemish free, and is especially effective on nicotine and water stains.  Can be primed, sanded and top-coated the same day, saving time and money. Designed to resists cracking and peeling and is compatible with most decorative top coats.

Alkali Resisting Primer 2.5L

An off-white primer of very low lead content for brush or spray application. Designed for cementitious type surfaces with an alkaline nature.

Aluminium Gloss 1L & 2.5L

GLAG00

Bright Aluminium high gloss finish is based on a high quality alkyd resin system suitable for interior and exterior use. This product achieves a high standard finish giving excellent durability. Manufactured in the UK by FLAG Paints Ltd.

Aluminium Primer 1L & 2.5L

A multi purpose primer. Particularly valuable in minimising "bleeding" on the more resinous types of timber. Formulated to seal knots and prevent resin seepage, This primer is ideal for both interior and exterior applications. The original self-knotting primer which for many years has proved the most successful product of its kind.

Anti Climb Security Paint 5L

MIACB0

Anti-climb paint is a thick glutinous coating. In appearance it is similar to smooth gloss paint when applied but remains slippery indefinitely so preventing any intruder from gaining a foothold. It is very difficult to remove from clothing. Anti-climb paint continues to work in hot or cold weather conditions adhering to the surfaces to which it is applied. Note: As a lawful requirement do not apply under 2m height, users must erect a warning sign after Anti Climb has been applied. Manufactured in the UK by FLAG Paints Ltd. Theoretical spreading rate: 2.5 litres per sq. metre. 

Anti Corrosive QD Metal Primer

PRACR5

High build quick air-drying oxide primer for use on ferrous metals, provides good protection prior to over coating with most solvent based finishing products. Suitable for a wide variety of applications where speed and ease of application are required. Compatible with FLAG Hammer Finish and FLAG Smooth Metal paints. ​

Anti Rugine (Black) 5L

INBAR0

High quality one coat anti-rust metal paint. Based on Micaceous Iron Oxide. This high build primer is suitable either for brushing or spraying purposes. Provides excellent adhesion to ferrous metals and imparts good water resistance. Manufactured in the UK by FLAG Paints Ltd.​

Anti Slip PU Floor Paint 5L & 20L

ASFP0

Anti slip polyurethane floor paint based on a high quality resin system with a very fine textured finish. It is suitable for application to most surfaces and will provide a hard wearing, water and oil resistant finish, this product is ideal for general walkways, factory and garage floors. *Important Note: This product has anti-slip properties and therefore provides slip resistance, however, it is not possible to guarantee a totally non-slip surface. Manufactured in the UK by FLAG Paints Ltd. Click here to view the slip resistance test certificate.

Anti Slip PU Floor Paint (Yellow) 5L & 20L

ASFP000

FLAG Anti Slip PU Floor Paint (Safety Yellow) is a heavy duty, quick drying polyurethane paint with a durable, chemical resistant and slip resistant finish. Ideal for high visibility safety markings. Anti slip PU floor paint (PU is an abbreviation of polyurethane) based on a high quality resin system with a very fine textured finish. It is suitable for application to most surfaces and will provide a hard wearing, water and oil resistant finish, this product is ideal for general walkways, factory and garage floors. *Important Note: This product has anti-slip properties and therefore provides slip resistance, however, it is not possible to guarantee a totally non-slip surface. Manufactured in the UK by FLAG Paints Ltd. Click here to see the slip resistance test certificate.

Asiposeal 5L

AB5000

Non-silicone based, single pack solvent-borne protective coating. Clear coating used to seal external masonry areas. Proven effective to stop water penetration. Provides long-term protection against surface contamination by air-borne spores. Manufactured in the UK by FLAG Paints Ltd.​

Black Board Paint (Matt Black)

A matt black finish suitable for wood/metal, also ideal for coating or re-coating traditional blackboards or pin boards. A high quality traditional solvent based paint. Manufactured in the UK by FLAG Paints. 

Black Bituminous Paint 5L

MIBB000

Black bitumen is based on a high quality bitumen that's dissolved in a special blend of petroleum solvents. It provides excellent protection against anti-rust, waterproofing and has good resistance to diluted acids and alkalis on a wide range of materials especially iron and steel. Conform to B.S. 3416:1988 TYPE 2 Use for protecting and preserving iron and steel fabrications, iron castings, timber, concrete. Including rainwater pipes and guttering, railings, corrugated iron sheets, roofs, manhole covers, storage tanks, pipe work, piling, concrete posts and fencing. Car, caravan and vehicle chassis work. Agricultural buildings, barns etc. Suitable for drinking water tanks, interior and exterior if used in accordance with B.S. instructions. Manufactured in the UK by FLAG Paints Ltd.

Chlorinated Rubber 5L

INRCRY

A very hard-wearing chemically resistant paint. Ideal where conditions require a degree of chemical and water resistance typical examples would be swimming pools, manhole covers and metal tanks. It is also excellent for road markings where high visibility and durability is a must. For concrete and ferrous metals. Suitable for road markings tank lining & manhole covers. Theoretical spreading rate 15 sq. metres per litre. Manufactured in the UK by FLAG Paints Ltd.​

Concrete Sealer 5L

CS5000

Clear coating used to seal concrete floors, walls and block paving driveways. Theoretical spreading rate 16 sq. metres per litre. Manufactured in the UK by FLAG Paints Ltd.

Flagspeed Machinery Enamel 5L

Flagspeed machinery enamel is based on high quality polyurethane, which gives good exterior durability, an appropriate primer is recommended. This is a tough industrial paint with rapid drying properties which permit short down times when painting machinery and rapid handling of components after painting. Normally a special order only item.

Gloss Paint (White) 1L & 2.5L

GLGL000

A superior alkyd topcoat reinforced with polyurethane resin. For all general wood and metal surfaces. Undercoat with FLAG Trade Primer/Undercoat. For interior and exterior use. Manufactured in the UK by FLAG Paints Ltd. Coverage 15 sq. m. per litre.

Also see One Coat Gloss

Hammer Finish Paint

Quick drying paint to give a hammer finish to metal substrates. Easy to apply. Compatible with FLAG Anti Corrosive QD Primer. Excellent corrosion resistant properties. Semi-gloss finish. Coverage: 5m² per 500ml. This product is normally a special order item (with minimum order quantities) but some excess stock may be available in QuickBuy.

Heavy Duty Elastomeric Floor Coating (Anti Slip) 2.5L

FPASEL25

A blend of high quality thermo-acrylic and polyurethane resins resulting in a heavy duty coating that offers excellent protection for high traffic areas. This product is Elastomeric and therefore offers high levels of flexibility for a long lasting durable finish. Ideal for areas that are subjected to frequent heavy use eg. car parks, stairs, walkways, high traffic public areas, and industrial work areas. Contains Dolomite stone to provide anti-slip properties. This product has a very fine textured, almost smooth, finish. Suitable for external areas such as driveways, pavements and balconies. Click here to view the slip resistance test certificate.

For interior and exterior use.

Manufactured in the UK by FLAG Paints Ltd. 

Heavy Duty Elastomeric Floor Coating (Anti Slip) 5L

FPASEL5

A blend of high quality thermo-acrylic and polyurethane resins resulting in a heavy duty coating that offers excellent protection for high traffic areas. This product is Elastomeric and therefore offers high levels of flexibility for a long lasting durable finish. Ideal for areas that are subjected to frequent heavy use eg. car parks, stairs, walkways, high traffic public areas, and industrial work areas. Contains Dolomite stone to provide anti-slip properties. This product has a very fine textured, almost smooth, finish. Suitable for external areas such as driveways, pavements and balconies. Click here to view the slip resistance test certificate.

For interior and exterior use.

Manufactured in the UK by FLAG Paints Ltd.