Acid Etch Solution is a pre-treatment for concrete power floated or very smooth concrete floors. The Acid Etch Solution opens the pores of the concrete and prepares the surface to accept its next treatment, allowing excellent adhesion. Coverage: Approx. 20 sq. meters per litre.
Bright Aluminium high gloss finish is based on a high quality alkyd resin system suitable for interior and exterior use. This product achieves a high standard finish giving excellent durability. Manufactured in the UK by FLAG Paints Ltd.
A multi purpose primer. Particularly valuable in minimising "bleeding" on the more resinous types of timber. Formulated to seal knots and prevent resin seepage, This primer is ideal for both interior and exterior applications. The original self-knotting primer which for many years has proved the most successful product of its kind.
Anti-climb paint is a thick glutinous coating. In appearance it is similar to smooth gloss paint when applied but remains slippery indefinitely so preventing any intruder from gaining a foothold. It is very difficult to remove from clothing. Anti-climb paint continues to work in hot or cold weather conditions adhering to the surfaces to which it is applied. Note: As a lawful requirement do not apply under 2m height, users must erect a warning sign after Anti Climb has been applied. Manufactured in the UK by FLAG Paints Ltd. Theoretical spreading rate: 2.5 litres per sq. metre.
High build quick air-drying oxide primer for use on ferrous metals, provides good protection prior to over coating with most solvent based finishing products. Suitable for a wide variety of applications where speed and ease of application are required. Compatible with FLAG Hammer Finish and FLAG Smooth Metal paints.
High quality one coat anti-rust metal paint. Based on Micaceous Iron Oxide. This high build primer is suitable either for brushing or spraying purposes. Provides excellent adhesion to ferrous metals and imparts good water resistance. Manufactured in the UK by FLAG Paints Ltd.
Anti slip polyurethane floor paint based on a high quality resin system with a very fine textured finish. It is suitable for application to most surfaces and will provide a hard wearing, water and oil resistant finish, this product is ideal for general walkways, factory and garage floors. *Important Note: This product has anti-slip properties and therefore provides slip resistance, however, it is not possible to guarantee a totally non-slip surface. Manufactured in the UK by FLAG Paints Ltd. Click here to view the slip resistance test certificate.
FLAG Anti Slip PU Floor Paint (Safety Yellow) is a heavy duty, quick drying polyurethane paint with a durable, chemical resistant and slip resistant finish. Ideal for high visibility safety markings. Anti slip PU floor paint (PU is an abbreviation of polyurethane) based on a high quality resin system with a very fine textured finish. It is suitable for application to most surfaces and will provide a hard wearing, water and oil resistant finish, this product is ideal for general walkways, factory and garage floors. *Important Note: This product has anti-slip properties and therefore provides slip resistance, however, it is not possible to guarantee a totally non-slip surface. Manufactured in the UK by FLAG Paints Ltd. Click here to see the slip resistance test certificate.
A quick drying non-toxic low odour single pack water based acrylic paint designed to seal, colour and protect concrete floors. Contains dolomite stone for added strength and anti-slip* properties. Excellent water, petrol and oil resistant also ideal for general walkways. Excellent long lasting durability and colour retention. The toughest water based acrylic floor paint that FLAG has ever made! *Important Note: This product has anti-slip properties and therefore provides slip resistance, however, it is not possible to guarantee a totally non-slip surface. Stir well before use. Mix tins with different batch numbers together before use. Caution: Protect from frost when stored. Do not apply if surface temperature is below 10°C. Manufactured in the UK by FLAG Paints Ltd. Click here to view the slip resistance test certificate.
Apexior No.1 is a special graphite/bitumen compound, designed to act as an anti-corrosive coating for metal surfaces in continuous contact with hot water above 93°C (200°F). It has also been proven to be unaffected by steam reaching temperatures of 540°C (1004°F) while actually improving the boiling characteristics/steam generation patterns of the boiler/plant in which it is used. Indeed it has been shown that heat transmission is increased by up to 35% by the use of this product, giving real energy efficiency and cost savings. It is very easy to apply and maintain and imparts no smell, or discolouration to liquids with which it comes into contact. Price on request.
Apexior No.3, is an ideal anti-corrosive coating for metal surfaces in continuous contact with fresh or salt water at temperatures up to 52°C (125°F). To add to its versatility, Apexior No.3 also has a wide range of marine applications and is resistant to dry heat up to 232°C (450°F). It is as easy to apply and maintain as Apexior No.1 and shares the same properties - it to imparts no smell or discolouration to liquid. Price on request.
The Asipo range has been specially formulated for use in high risk areas where humidity and condensation can lead to the growth of mould and algae. Asipo Internal is a superior water-based decorative emulsion for combating internal problems of mould growth. This product provides long-term protection from mould and algae and is designed to stop contamination and discolouration. Asipo Internal is an economical solution but a high quality product. Easy to apply, providing a long lasting durable finish. Manufactured in the UK by FLAG Paints Ltd.
The Asipo range has been specially formulated for use in high risk areas where humidity and condensation can lead to the growth of mould and algae. Asipo Internal is a superior water-based decorative emulsion for combating internal problems of mould growth. This product provides long-term protection from mould and algae and is designed to stop contamination and discolouration. Asipo Internal is an economical solution but a high quality product. Easy to apply, providing a long lasting durable finish. Manufactured in the UK by FLAG Paints Ltd.
Non-silicone based, single pack solvent-borne protective coating. Clear coating used to seal external masonry areas. Proven effective to stop water penetration. Provides long-term protection against surface contamination by air-borne spores. Manufactured in the UK by FLAG Paints Ltd.
Black bitumen is based on a high quality bitumen that's dissolved in a special blend of petroleum solvents. It provides excellent protection against anti-rust, waterproofing and has good resistance to diluted acids and alkalis on a wide range of materials especially iron and steel. Conform to B.S. 3416:1988 TYPE 2 Use for protecting and preserving iron and steel fabrications, iron castings, timber, concrete. Including rainwater pipes and guttering, railings, corrugated iron sheets, roofs, manhole covers, storage tanks, pipe work, piling, concrete posts and fencing. Car, caravan and vehicle chassis work. Agricultural buildings, barns etc. Suitable for drinking water tanks, interior and exterior if used in accordance with B.S. instructions. Manufactured in the UK by FLAG Paints Ltd.
A very hard-wearing chemically resistant paint. Ideal where conditions require a degree of chemical and water resistance typical examples would be swimming pools, manhole covers and metal tanks. It is also excellent for road markings where high visibility and durability is a must. For concrete and ferrous metals. Suitable for road markings tank lining & manhole covers. Theoretical spreading rate 15 sq. metres per litre. Manufactured in the UK by FLAG Paints Ltd.
Clear coating used to seal concrete floors, walls and block paving driveways. Theoretical spreading rate 16 sq. metres per litre. Manufactured in the UK by FLAG Paints Ltd.
Quick drying paint to give a hammer finish to metal substrates. Easy to apply. Compatible with FLAG Anti Corrosive QD Primer. Excellent corrosion resistant properties. Semi-gloss finish. Coverage: 5m² per 500ml. This product is normally a special order item (with minimum order quantities) but some excess stock may be available in QuickBuy.
FPASEL25
A blend of high quality thermo-acrylic and polyurethane resins resulting in a heavy duty coating that offers excellent protection for high traffic areas. This product is Elastomeric and therefore offers high levels of flexibility for a long lasting durable finish. Ideal for areas that are subjected to frequent heavy use eg. car parks, stairs, walkways, high traffic public areas, and industrial work areas. Contains Dolomite stone to provide anti-slip properties. This product has a very fine textured, almost smooth, finish. Suitable for external areas such as driveways, pavements and balconies. Click here to view the slip resistance test certificate.
For interior and exterior use.
Manufactured in the UK by FLAG Paints Ltd.
FPASEL5
A blend of high quality thermo-acrylic and polyurethane resins resulting in a heavy duty coating that offers excellent protection for high traffic areas. This product is Elastomeric and therefore offers high levels of flexibility for a long lasting durable finish. Ideal for areas that are subjected to frequent heavy use eg. car parks, stairs, walkways, high traffic public areas, and industrial work areas. Contains Dolomite stone to provide anti-slip properties. This product has a very fine textured, almost smooth, finish. Suitable for external areas such as driveways, pavements and balconies. Click here to view the slip resistance test certificate.
For interior and exterior use.
Manufactured in the UK by FLAG Paints Ltd.
FLAG Paints Ltd UK based specialist coatings manufacturer phone 01621 785173. Paints and surface finishes manufactured in the UK.
All Products
Advanced Technologies
Anti Fouling Paints
Anti Mould Paints
Decorative Paints
Floor Paints
French Polish Products
Seen On TV
Industrial Paints
Marine Paints
Primers
Roofing Maintenance
Security
Solvent Based Paints
Solvents Thinners
Specialist Paints
Water Based Lacquer
Water Based Paints
Woodcare Oils
Woodcare Specialist
Woodcare Varnish Stains
Woodcare Waxes
FLAG Paints Ltd. Tel: 01621 785173 Fax: 01621 785393 E-mail: web@flagpaints.co.uk 8 Springfield Road, Springfield Industrial Estate, Burnham-on-Crouch, Essex, CM0 8UA. Registered in England No 00353436. VAT Registration No GB 838 9466 67. EORI Nos GB838946667000 & XI838946667000. Web-master MJN © FLAG Paints Ltd 2013 - 2023
Home • Flag Products • Stockists • Datasheets • News Blog • In the Press • About us • Contact us • FAQ • Quick Shop • Terms & Conditions • Environmental Info
This website contains materials, including photographs and images, which are protected by copyright. You may not reproduce any of the photographs and images without the prior written consent of the copyright owner.
